HP LP2275w 22" Widescreen LCD Monitor KE289A4

Çözünürlük:  1680 x 1050 @ 60 Hz (WSXGA+)

Parlaklık: 300 cd/m²

Kontrast oranı: 1000:1

Input: DVI-I, DisplayPort

4 x USB 2.0 port

Garanti : 3 yıl

Model
KE289A4 (single unit)
KE289A6 (quad head bulk pack)

Technical Specifications

Panel Type 22-in (55.9 cm) Wide-Aspect Active Matrix TFT (thin film transistor)
Viewable Image Area 22 in (55.9 cm) widescreen; diagonally measured
Screen Opening
(W x H)
18.87 x 11.7 in (47.5 x 29.8 cm)
Viewing Angle (typical) Up to 178° horizontal/178° vertical (10:1 minimum contrast ratio)
Brightness (typical)* 300 nits (cd/m2)
Contrast Ratio (typical)* 1000:1
Response Time (typical)* <6 ms (gray to gray), 16 ms (on/off)
Pixel Pitch 0.282 mm
Backlight Lamp Life
(to half brightness)
30K hours
Color Gamut HP Vivid Color support (92% color gamut)
*All performance specifications represent the typical specifications provided by HP's component manufacturers; actual performance may vary either higher or lower.
On Screen Display
(OSD) Controls
Buttons or Switches OSD menu select, auto adjust/OSD down, factory reset/OSD UP, input select, power
Languages English, French, German, Spanish, Italian, Dutch, Japanese, S. Chinese and Brazilian Portuguese
User Controls Brightness, contrast, OSD control, color temperature (6500k, 9300k, custom, sRGB), individual color control, information, video input control, clock, clock phase, monitor management, factory reset
Signal Interface/ Performance Horizontal Frequency 30 to 93 KHz (DVI input for modes with pixel clock less than 170 MHz)
Vertical Frequency 48 to 85 Hz (DVI input for modes with pixel clock less than 170 MHz)
Native Resolution 1680 x 1050 @ 60 Hz (WSXGA+), 1.76 Million pixels
Preset VESA Graphic Modes (non-interlaced) 1600 x 1000 @ 60 Hz
1440 x 900 @ 60 Hz
1280 x 1024 @ 60 Hz and 75 Hz
1280 x 960 @ 60 Hz
1024 x 768 @ 60 Hz and 75 Hz
800 x 600 @ 60 Hz and 75 Hz
640 x 480 @ 60 Hz and 75 Hz
Text Mode 720 x 400 @ 70 Hz
Mac Mode 1152 x 870 @ 75 Hz and 832 x 624 @ 75 Hz
Sun Mode 1152 x 900 @ 66 Hz
Maximum Pixel Clock Speed 170 MHz (analog input); 170 MHz (DVI input)
User Programmable Modes Yes, 15
Anti-Glare Yes
Anti-Static Yes
Default Color Temperature 6500 K
Video/Other Inputs Plug and Play Yes
Self Powered USB 2.0 Hub One upstream, four downstream ports (cable included)
Input Connectors 1 DVI-I connector, 1 DisplayPort connector; HDCP support
Input Impedance 75 ohms ± 10%
Sync Input TTL separate synch
DVI Cable Length 5.9 ft (1.8 m)
DVI-I to VGA Cable Length 5.9 ft (1.8 m)
DisplayPort Cable Length 6.5 ft (2.0 m)
Power Input Power Auto-Sensing, 100 to 240 VAC, 50 +/-3 Hz to 60 +/-3 Hz)
Frequency 47.5 to 63 Hz
Typical Power Consumption 56 watts (120VAC, USB ports 25% of maximum load)
Maximum < 85 watts
Power Saving < 2 watts standby; <1 watt off
Power Cable Length 6.2 ft (1.9 m)
Mechanical Dimensions (H x W x D) Unpacked w/stand (single) 14.8 to 18.8 x 19.9 x 10.0 in
(37.7 to 47.7 x 50.6 x 25.3 cm)
Unpacked w/o stand (head only) 12.9 x 19.9 x 3.3 in
(32.8 x 50.6 x 8.26 cm)
Packaged (single) 17.3 x 23.9 x 13.4 in
(44.0 x 60.6 x 34.0 cm)
Packaged (quad head bulk) 24.6 x 22.4 x 16.6 in
(62.4 x 56.9 x 42.2 cm)
Weight Unpacked w/stand (single) 10.67 lb (4.84 kg)
Unpacked w/o stand (head only) 11.4 lb (5.17 kg)
Packaged (single) 24.9 lb (11.3 kg)
Packaged (quad head bulk) 56.7 lb (25.7 kg)
Tilt Range -5° to + 30° vertical
Swivel Range -45° to + 45°
Height Adjustable Yes, range 3.9 in (10.0 cm)
Pivot Rotation Yes
Base Attachable, ships detached
Environmental Temperature – Operating 41° to 95° F (5° to 35° C)
Temperature – Non-operating -4° to 140° F (-20° to 60° C)
Humidity – Operating 20% to 80% non-condensing
Humidity – Non-operating 5% to 95%, 38.7° C max wet-bulb
Altitude – Operating +12,000 ft (3,658 m)
Altitude – Non-operating +40,000 ft (12,192 m)
Environmental Data Eco-Label Certifications and Declarations

This product has received or is in the process of being certified to the following approvals and may be labeled with one or more of these marks:

  • ENERGY STAR®
  • IT ECO declaration
  • Korea Eco-label
  • EPEAT™ - Silver
Energy Consumption
(in accordance with ENERGY STAR® test method)
AC Input Voltage at 100 VAC +/- 5 VAC, 50 Hz +/- 3 Hz AC Input Voltage at 115 VAC +/- 5 VAC, 60 Hz +/- 3 Hz AC Input Voltage at 230 VAC +/- 5 VAC, 50 Hz +/- 3 Hz
  Normal Operation 37 watts 37.1 watts 36.9 watts
  Sleep 1.45 watts 1.64 watts 1.41 watts
  Off 0.67 watts 0.85 watts 0.65 watts
       
Heat Dissipation* AC Input Voltage at 100 VAC +/- 5 VAC, 50 Hz +/- 3 Hz AC Input Voltage at 115 VAC +/- 5 VAC, 60 Hz +/- 3 Hz AC Input Voltage at 230 VAC +/- 5 VAC, 50 Hz +/- 3 Hz
  Normal Operation 127 BTU/hr 127 BTU/hr 126 BTU/hr
  Sleep 5 BTU/hr 6 BTU/hr 5 BTU/hr
  Off 2 BTU/hr 3 BTU/hr 2 BTU/hr
* Heat dissipation is calculated based on the measured watts, assuming the service level is attained for one hour.
Longevity and Upgrading Upgradeability features contained in the product include:
One upstream and four downstream USB ports
Ergonomics The monitor meets the ergonomic requirement of EN-ISO 13406-2 for flat panel displays.
Additional Information

This product is in compliance with the Restrictions of Hazardous Substances (RoHS) Directive, 2002/95/EC.

This HP product is designed to comply with the Waste Electrical and Electronic Equipment (WEEE) Directive, 2002/96/EC.

This product is in compliance with California Proposition 65 (State of California; Safe Drinking Water and Toxic Enforcement Act of 1986).

This product is in compliance with the IEEE 1680 (EPEAT) standard at the Silver level, see: www.epeat.net

Plastics parts weighing over 25 grams used in the product are marked per ISO 11469 and ISO1043.

Display meets the requirement for low frequency electromagnetic fields per TCO and prEN50279 A/B/C.

This product contains 0% recycled materials (by wt.)

This product is 95.1% recycle-able when properly disposed of at end of life.

Packaging Materials

  • External:
    • Corrugated carton 1400 g
    • Polyethylene low density 35.3g
RoHS Compliance Hewlett-Packard is committed to compliance with all applicable environmental laws and regulations, including the European Union Restriction of Hazardous Substances (RoHS) Directive. HP's goal is to exceed compliance obligations by meeting the requirements of the RoHS Directive on a worldwide basis. By July 1, 2006, RoHS substances will be virtually eliminated (virtually = to levels below legal limits) for all HP electronic products subject to the RoHS Directive, except where it is widely recognized that there is no technically feasible alternative (as indicated by an exemption under the EU RoHS Directive).
Material Usage

This product does not contain any of the following substances in excess of regulatory limits (refer to the HP General Specification for the
Environment at www.hp.com/hpinfo/globalcitizenship/environment/
supplychain/gen_specifications.html

  • Asbestos
  • Certain Azo Colorants
  • Certain Brominated Flame Retardants – may not be used as flame retardants in plastics
  • Cadmium
  • Chlorinated Hydrocarbons
  • Chlorinated Paraffins
  • Formaldehyde
  • Halogenated Diphenyl Methanes
  • Lead carbonates and sulfates
  • Lead and Lead compounds
  • Mercuric Oxide Batteries
  • Nickel - finishes must not be used on the external surface designed to be frequently handled or carried by the user.
  • Ozone Depleting Substances
  • Polybrominated Biphenyls (PBBs)
  • Polybrominated Biphenyl Ethers (PBBEs)
  • Polybrominated Biphenyl Oxides (PBBOs)
  • Polychlorinated Biphenyl (PCB)
  • Polychlorinated Terphenyls (PCT)
  • Polyvinyl Chloride (PVC) – except for wires and cables, and certain retail packaging has been voluntarily removed from most applications.
  • Radioactive Substances
  • Tributyl Tin (TBT), Triphenyl Tin (TPT), Tributyl Tin Oxide (TBTO)
Packaging

HP follows these guidelines to decrease the environmental impact of product packaging:

  • Eliminate the use of heavy metals such as lead, chromium, mercury and cadmium in packaging materials.
  • Eliminate the use of ozone-depleting substances (ODS) in packaging materials.
  • Design packaging materials for ease of disassembly.
  • Maximize the use of post-consumer recycled content materials in packaging materials.
  • Use readily recyclable packaging materials such as paper and corrugated materials.
  • Reduce size and weight of packages to improve transportation fuel efficiency.
  • Plastic packaging materials are marked according to ISO 11469 and DIN 6120 standards.
End-of-life Management and Recycling Hewlett-Packard offers end-of-life HP product return and recycling programs in many geographic areas. To recycle your product, please go to: www.hp.com/recycle or contact your nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner.
Hewlett-Packard Corporate Environmental Information For more information about HP's commitment to the environment:
Global Citizenship Report
www.hp.com/hpinfo/globalcitizenship/gcreport/index.html
Eco-label certifications
www.hp.com/hpinfo/globalcitizenship/environment
productdesign/ecolabels.html
ISO 14001 certificates:
www.hp.com/hpinfo/globalcitizenship/environment/
operations/envmanagement.html
Options HP Silver LCD Speaker Bar—Part number: EE418AA Powered directly by the monitor or the PC, the Speaker Bar seamlessly attaches to the monitor's lower bezel to bring full audio support to select HP LCD monitors. Features include dual speakers with full sound range and external jack for headphones. Sold separately. For more information, refer to the HP Silver LCD Speaker Bar QuickSpecs.
HP Security Lock—Part number PC766A Combines aircraft-grade steel and Kevlar fiber to securely lock down your monitor and help prevent theft.
Other Accessories Included Single unit (1) DVI cable, (1) DVI-I to VGA cable, (1) DisplayPort cable, 1 USB cable, 1 power cable (single unit)
Quad head bulk pack (4) DVI cables, (4) DVI-I to VGA cables, (4) DisplayPort cables, 4 USB cables, 4 power cables
Software HP Display Assistant is a software utility that enables theft deterrence and allows monitor adjustment, color calibration, and security/asset management using the Display Data Channel Command Interface (DDC/CI) protocol of the connected PC.
HP Display LiteSaver allows you to schedule Sleep mode at preset times to help protect the monitor against image retention, drastically lower power consumption and energy costs, and extend the lifespan of the monitor.
Pivot Pro software from Portrait Displays, Inc. interacts with your PC's native graphics driver to enable seamless portrait screen redraws with a simple mouse-click or keyboard command. Pivot Pro supports 90-degree portrait and landscape views. Language support is available in English, Japanese, French, German, Spanish, Italian, and Traditional and Simplified Chinese.
User Guide Languages English, B. Portuguese, French, LA Spanish, Korean, S. Chinese, T. Chinese, Bahasa, Japanese, Danish, Finnish, German, Norwegian, Spanish, Swedish, Greek, Polish, Russian, Slovenian, Turkish
Warranty Languages English, Canadian French, LA Spanish, Brazilian Portuguese, Danish, German, Castilian Spanish, French, Italian, Dutch, Norwegian, Finnish, Swedish, Bahasa Indonesian, Korean, T. Chinese, S. Chinese
Color All carbonite
VESA External Mounting Yes, standard 4 hole pattern, 100 mm
Security Lock-Ready Yes, one slot available
Certification and Compliance TCO'03, ISO 13406-2 VDT Guidelines Approval, CISPR Requirements, VCCI Approvals, MIC (Korean) Requirements, CSA, Australian ACA Approval, "GS" Mark, TUV Approvals, CE Marking, FCC Approval, ENERGY STAR® qualified, Microsoft® Windows® Certification (Microsoft® Windows® 98, Microsoft Windows 2000, Microsoft Windows XP, and Windows Vista® Premium), EPEAT™ Silver
Compatibility Compatible with platforms using the VESA standard video modes. Recommended for use with HP products.
Service and Warranty Three years parts, labor, and on-site service. 24-hour, 90-day, toll-free technical support. Replacement options may include second business day on-site service, or next business day direct replacement, at HP's sole discretion.*  With direct replacement, HP will ship a replacement display product directly to you. Using the prepaid shipping labels provided, return your failed display to HP in the same packaging as the replacement. Certain restrictions and exclusions apply. For details see your product warranty or contact HP Customer Support.
!
 <<