HP ProCurve 10-GbE X2-SC SR Optic (J8436A)

An X2 form-factor transceiver that supports the 10-Gigabit SR standard, providing 10-Gigabit connectivity up to 300 meters on multimode fiber.

Ports:1 SC 10-GbE port (IEEE 802.3ae Type 10Gbase-SR); Duplex: full only

Cabling

Type: 62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively;

Maximum distance:

·         62.5 µm multimode cable @ 160 MHz*km = 2-26 meters

·         62.5 µm multimode cable @ 200 MHz*km = 2-33 meters

·         50 µm multimode cable @ 400 MHz*km = 2-66 meters

·         50 µm multimode cable @ 500 MHz*km = 2-82 meters

·         50 µm multimode cable @ 2000 MHz*km = 2-300 meter

Notes

·         850 nm serial optics

·         For fiber patch cords, use UPC finish/polish (APC is not recommended)

HP ProCurve 10-GbE X2-SC LR Optic (J8437A)

An X2 form-factor transceiver that supports the 10-Gigabit LR standard, providing 10-Gigabit connectivity up to 10 km on singlemode fiber.

Ports:1 SC 10-GbE port (IEEE 802.3ae Type 10Gbase-LR); Duplex: full only

Cabling

Type: Low metal content, single-mode fiber-optic, complying with ITU-T

G.652 and ISO/IEC 793-2 Type B1;

Maximum distance:

·         9/125 µm single-mode cable = 2 m-10 km

Notes

·         1310 nm serial optics

·         Conditioning patch cord cables are not supported

·         For fiber patch cords, use UPC finish/polish (APC is not recommended)

HP ProCurve 10-GbE X2-SC ER Optic (J8438A)

An X2 form-factor transceiver that supports the 10-Gigabit ER standard, providing 10-Gigabit connectivity up to 30 km on single-mode fiber (40 km on engineered links).

Ports:1 SC 10-GbE port (IEEE 802.3ae Type 10Gbase-ER); Duplex: full only

Cabling

Type:Low metal content, single-mode fiber-optic, complying with ITU-T G.652 and ISO/IEC 793-2 Type B1;

Maximum distance:

·         2 m - 30 km (max 40 km on engineered links)

Notes

·         1550 nm serial optics

·         Conditioning patch cord cables are not supported

·         For fiber patch cords, use Ultra Physical Contact (UPC) surface termination/polish. Angled Physical Contact (APC) is not recommended.

HP ProCurve 10-GbE X2-CX4 Transceiver (J8440B)

An X2 form-factor transceiver with a CX4 connector that provides 10-Gigabit connectivity up to 15 meters over CX4 (copper) cable.

Ports:1 CX4 transceiver port

Cabling

Maximum distance:

·         15 m using CX4 cables

·         300 m using optical media converters and multimode fiber cable

Notes

·         Connector: CX4; Duplex: full

·         Use CX4 10-GbE cable (0.5-15 m) or ProCurve 10-GbE CX4 Media

·         Converter (J8439A).

·         For suggested vendors of CX4 cables, please see the "Cabling" answers on the "ProCurve 10-GbE Transceivers" FAQs Web page.

Introduction

A small form-factor pluggable (SFP) 100-Megabit BX (bi-directional) "downstream" transceiver that provides 100 Mbps full-duplex connectivity up to 10 km on one strand of singlemode fiber. The J9099B connects to the J9100B "upstream" transceiver, or to any IEEE-standard 100BASE-BX10-U ("upstream") device.

HP ProCurve 100-BX-D SFP-LC Transceiver (J9099B)

A small form-factor pluggable (SFP) 100-Megabit BX (bi-directional) "downstream" transceiver that provides 100 Mbps full-duplex connectivity up to 10 km on one strand of singlemode fiber. The J9099B connects to the J9100B "upstream" transceiver, or to any IEEE-standard 100BASE-BX10-U ("upstream") device.

Ports:1 LC 100BASE-BX10 port (IEEE 802.3ah Type 100BASE-BX10-D); Duplex: full only

Cabling

Type:Single-mode fiber optic, complying with ITU-T G.652;

Maximum distance:

·         0.5-10,000 m (single-mode fiber)

Notes

·         For supported platforms and minimum software requirements to support this product, see the document titled “Support for the HP ProCurve BX Transceivers” on the “ProCurve Mini-GBICs and SFPs” Manuals Web page.

·         The J9099B connects to the J9100B “upstream” transceiver, or to any IEEE-standard 100BASE-BX10-U (“upstream”) device. (A 100-BX-D transceiver can only connect to a 100-BX-U product. You cannot connect two 100-BX-D transceivers together.)

·         Transmit wavelength: 1550 nm. Receive wavelength: 1310 nm.

Introduction

A small form-factor pluggable (SFP) 100-Megabit BX (bi-directional) "downstream" transceiver that provides 100 Mbps full-duplex connectivity up to 10 km on one strand of singlemode fiber. The J9099B connects to the J9100B "upstream" transceiver, or to any IEEE-standard 100BASE-BX10-U ("upstream") device.

Technical Specifications

HP ProCurve 100-BX-U SFP-LC Transceiver (J9100B)

A small form-factor pluggable (SFP) 100-Megabit BX (bi-directional) "upstream" transceiver that provides 100 Mbps full-duplex connectivity up to 10 km on one strand of singlemode fiber. The J9100B connects to the J9099B "downstream" transceiver, or to any IEEE-standard 100BASE-BX10-D ("downstream") device.

Ports:1 LC 100BASE-BX10 port (IEEE 802.3ah Type 100BASE-BX10-U); Duplex: full only

Cabling

Type:Single-mode fiber optic, complying with ITU-T G.652;

Maximum distance:

·         0.5-10,000 m (single-mode fiber)

Notes

·         For supported platforms and minimum software requirements to support this product, see the document titled “Support for the HP ProCurve BX Transceivers” on the “ProCurve Mini-GBICs and SFPs” Manuals Web page.

·         The J9100B connects to the J9099B “downstream” transceiver, or to any IEEE-standard 100BASE-BX10- D (“downstream”) device. (A 100-BX-U transceiver can only connect to a 100-BX-D product. You cannot connect two 100-BX-U transceivers together.)

·         Transmit wavelength: 1310 nm. Receive wavelength: 1550 nm.

HP ProCurve 10-GbE X2-SC LRM Optic (J9144A)

An X2 form-factor transceiver that supports the 10-Gigabit LRM standard, providing 10-Gigabit connectivity up to 220 meters on legacy multimode fiber.

Ports: 1 SC 10-GbE port (IEEE 802.3aq Type 10Gbase-LRM); Duplex: full only

Cabling

Type:62.5/125 ìm or 50/125 ìm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively (a mode conditioning patch cord may be needed in some multimode fiber installations);

Maximum distance:

·         62.5 µm multimode cable @ 160/500 MHz*km = 0.5–220 meters

·         62.5 µm multimode cable @ 200/500 MHz*km = 0.5–220 meters

·         50 µm multimode cable @ 400/400 MHz*km = 0.5–100 meters

·         50 µm multimode cable @ 500/500 MHz*km = 0.5–220 meters

·         50 µm multimode cable @ 1500/500 MHz*km = 0.5–220 meters

Notes

·         1310 nm serial optics

·         For OM3 cable (50 µm multimode @ 1500/500 MHz*km), a mode conditioning patch cord is not required. Other multimode cables may require mode conditioning patch cords to achieve the maximum distances listed above.

·         See the document titled "Support for the J9144A 10-GbE X2-SC LRM Optic", on the "ProCurve 10-GbE Transceivers" Manuals Web page, for supported platforms and minimum software requirements to support this product.