ProCurve 600 Redundant and External Power Supply (RPS/EPS) 6 RPS portu ve 2 EPS portu vardır .Backup ve Power over Ethernet power sağlar.

Port:6 redundant power supply port

Sınırlamalar:Her port bağlı olduğu switche redundant +12 V power sağlayabilir . Sadece 1 port birim zamanda power sağlayabilir.

2 external power supply port

Sınırlamalar: Max . 2 switche , +50 VDC external PoE sağlar .Bir cihaza max. 408 W full power sağlar.Bağlı 2 cihazın herbirine yarım power (204 W herbiri) sağlar.

Boyutlar: (D x W x H): (32.59 x 44.3 x 4.39 cm) (1U )

otomatik 100-240 V arası ayarlamasağlanır. (50 , 60 Hz)

Voltage:100-240 VAC

Current:9 / 5 A

Power consumption:800 W

RPS power:180 W

PoE power:408 W

Frequency:50 / 60 Hz

Management: Bağlı olan cihazlardan port interface ile bilgi alınır.

Supported device:

ProCurve Switch 2600-PWR series, ProCurve Switch 2800 series, ProCurve Switch 5300xl series, ProCurve Switch 3400cl series, ProCurve Switch 6400cl series, ProCurve Secure Router 7000dl series

V.35 DTE serial cable to be used with ProCurve Secure Router Serial dl Module to connect to external CSU/DSU

Length: (2 m)

X.21 DTE serial cable to be used with ProCurve Secure Router Serial dl Module to connect to external CSU/DSU

Connector:26-pin interface to dl serial module, X.21 DTE interface to external CSU/DSU

Length:6.56 ft. (2 m)

1-port v.90 analog modem module attaches as a daughter card to dl modules to provide backup capability. Users can also initiate an out-of-band console session through the modem interface.

Notes:Supports speeds from 300 bps to 33.6 kbps.

1-port ISDN BRI S/T module attaches as a daughter card to dl modules to provide backup capability. Includes 1 RJ11-RJ45 straight-through cable (3 m).

Connector:RJ-45

Interface:S/T interface support; support for 1 B channel (64 kbps)

1-port E1/FrE1 dl module with integrated CSU/DSU.Includes 1 RJ48-RJ48 Telco straight-through cable 5 m).

Connector:(E1) RJ-48C,1 RJ-45 for optional backup module

E1:2.048 Mbps (Nx64 kbps)

FrE1:DS0 channelized (Nx56/64 kbps)

Line code:HDB3, AMI

Framing:FAS with optional CRC-4

Receiver sensitivity:-30 dB

1-port E1/FrE1 dl module with integrated CSU/DSU and G.703 TDM interface to connect to a PBX for voice service. Includes 2 RJ48-RJ48 Telco straight-through cables (5 m).

Connector:(E1) RJ-48C,(G.703) RJ-48C,1 RJ-45 for optional backup module

E1:2.048 Mbps (30x64 kbps)

FrE1:DS0 channelized (Nx56/64 kbps)

Line code:HDB3, AMI

Framing:FAS with optional CRC-4

Receiver sensitivity:-30 dB

2-port E1/FrE1 dl module with integrated CSU/DSU. Includes 2 RJ48-RJ48 Telco straight-through cables (5 m).

Connector:(2xE1) RJ-48C,1 RJ-45 for optional backup module

E1:2.048 Mbps (30x64 kbps) for each E1 interface

FrE1:DS0 channelized (Nx56/64 kbps)

Line code:HDB3, AMI

Framing:FAS with optional CRC-4

Receiver sensitivity:-30 dB

1-port ADSL2+ Annex B dl Module supports ADSL/ADSL2/ADSL2+ over ISDN lines

Connector:(ADSL) RJ-11,1 RJ-45 for optional backup module

Supported standard:

·         ADSL, ADSL2, ADSL2+ for Annex B over ISDN lines

·         Min/Max upstream rate:

·         ADSL: 32 kbps to 800 kbps

·         ADSL2: 32 kbps to 800 kbps

·         ADSL2+: 32 kbps to 2 Mbps

·         Min/Max downstream rate:

·         ADSL: 224 kbps to 8 Mbps

·         ADSL2: 224 kbps to 12 Mbps

·         ADSL2+: 224 kbps to 24 Mbps

Line code:DMT

1-port ADSL2+ Annex A dl Module supports ADSL/ADSL2/ADSL2+ over POTS lines

Connector:

(ADSL) RJ-11,1 RJ-45 for optional backup module

Supported standard:

·         ADSL, ADSL2, ADSL2+ for Annex A over POTS lines

·         Min/Max upstream rate:

·         ADSL: 32 kbps to 800 kbps

·         ADSL2: 32 kbps to 800 kbps

·         ADSL2+: 32 kbps to 2 Mbps

·         Min/Max downstream rate:

·         ADSL: 224 kbps to 8 Mbps

·         ADSL2: 224 kbps to 12 Mbps

·         ADSL2+: 224 kbps to 24 Mbps

Line code:DMT